MacBook Professional: The Right Way To Remove Or Set Up Memory

De Transcription | Bibliothèque patrimoniale numérique Mines ParisTech
Aller à : navigation, rechercher


Learn to remove or install memory in your MacBook Professional laptop pc. To establish your MacBook Professional mannequin, use the knowledge in How one can establish MacBook Professional models. As soon as you're certain which model you will have, find it in the checklist under to go to the instructions for that model. Note: Apple laptops not listed on this table have non-removable memory. Use the tables under to affirm the memory you're installing is appropriate along with your MacBook Pro. For finest efficiency, fill each memory slots, installing an equal memory module in every slot. For greatest efficiency, fill each memory slots, putting in an equal memory module in each slot. For finest performance, fill both memory slots, installing an equal memory module in each slot. Warning: The internal parts of your MacBook Professional might be warm. If you have been using your MacBook Professional, wait ten minutes after shutting down the pc to let the internal elements cool earlier than continuing.



Shut down your MacBook Pro. Disconnect the ability adapter, Ethernet cable, USB cables, safety lock, and every other cables linked to the MacBook Pro to forestall damaging the computer. Turn over your MacBook Professional and remove the ten (10) screws that safe the underside case. Because the screws are completely different lengths, observe the screw lengths and places so you possibly can change the screws accurately. Put them apart in a secure place. Elevate off the case and place it to the side. Touch a steel floor inside the computer to discharge any static electricity out of your physique. Push the levers on the sides of the memory module in an outward direction to launch the module from the memory card slot. The Memory Wave pops up at an angle. Before removing it, be certain you find the half-circle notches. For those who don’t, attempt pressing the levers outward once more. Hold the memory module by its notches and remove it from the slot. Remove the other memory module.



Necessary: Hold the memory modules by their edges, and don't touch the gold connectors. Align the notch on the gold edge of the module with the notch in the decrease memory slot. Tilt the card and push the memory into the slot. Use two fingers with agency, even stress to push down on the Memory Wave Program module. There needs to be a click once you insert the memory appropriately. Repeat this process to put in an additional memory module in the top slot. Press down on the module to verify it's level. Word: Be sure you install the memory in line with this illustration, with the gold contacts inserted virtually fully into the connector. Substitute the underside case. Change and tighten the ten screws you eliminated earlier, ensuring to put the completely different length screws of their proper places. Please use the tables below to verify the memory being put in is compatible along with your MacBook Pro. For greatest efficiency, fill both memory slots, installing an equal memory module in every slot.



For greatest efficiency, fill each memory slots, putting in an equal memory module in every slot. For best efficiency, fill both memory slots, installing an equal memory module in every slot. Warning: The interior parts of your MacBook Professional may be warm. When you have been utilizing your MacBook Pro, wait ten minutes after shutting down the pc to let the interior parts cool before persevering with. Shut down your MacBook Pro. Disconnect the facility adapter, Ethernet cable, USB cables, Memory Wave safety lock, and another cables related to the MacBook Pro to forestall damaging the pc. Flip over your MacBook Professional and remove the ten (10) screws that safe the underside case. Because the screws are totally different lengths, be aware the screw lengths and locations so you'll be able to exchange the screws correctly. Put them apart in a safe place. Raise off the case and place it to the facet. Contact a metal surface inside the computer to discharge any static electricity from your physique.



Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before eradicating it, be sure that you find the half-circle notches. If you don’t, attempt pressing the levers outward again. Hold the memory module by its notches and remove it from the slot. Remove the other memory module. Vital: Hold the memory modules by their edges, and do not touch the gold connectors. Align the notch on the gold edge of the module with the notch within the lower memory slot. Tilt the card and push the memory into the slot. Use two fingers with agency, even stress to push down on the memory module. There ought to be a click on if you insert the memory appropriately. Repeat this process to install an additional memory module in the top slot. Press down on the module to verify it's stage.